Phosphor Bronze
CuSn10P / C51900 Phosphor Bronze
The industry standard for worm wheels. Excellent wear resistance and self-lubricating properties make it the preferred mating material for hardened steel worm shafts.
Material Data
- Composition
- Copper-Tin-Phosphorus alloy (90-10-0.2)
- Hardness
- 80-120 HB
- Temperature Range
- -100°C to 200°C
- Price Index
- $$$
- Standards
- ASTM B103, DIN 17662, JIS H5111
Strengths
- ✓Excellent wear resistance against steel
- ✓Self-lubricating properties reduce friction
- ✓Good corrosion resistance
- ✓Low coefficient of friction
- ✓Proven longevity in continuous operation
Limitations
- ✗Lower strength than steel
- ✗Not suitable for high-load applications without backup
- ✗Limited to moderate temperatures
- ✗Higher cost than cast iron
- ✗Requires precise machining for optimal fit
Typical Applications
- ▸Standard worm wheel construction
- ▸Elevator drive systems
- ▸Conveyor gearboxes
- ▸Automotive steering systems
- ▸General industrial power transmission
Compatible Shaft Materials
This worm wheel material pairs best with the following shaft materials:
Applicable Standards
Phosphor Bronze — Frequently Asked Questions
Why is phosphor bronze the standard material for worm wheels?
Phosphor bronze offers an exceptional combination of wear resistance against hardened steel, self-lubricating properties that reduce friction and heat, and proven longevity in continuous industrial operation. The tin content provides a hard, durable surface while the copper matrix ensures good heat dissipation.
What is the typical service life of a phosphor bronze worm wheel?
With proper lubrication and within rated load/speed conditions, phosphor bronze worm wheels typically last 10,000-30,000 operating hours. In elevator and conveyor applications, 15+ years of service is common before significant wear requires replacement.
Can phosphor bronze worm wheels operate without lubrication?
No. While phosphor bronze has some self-lubricating properties from tin, continuous operation without lubrication will cause rapid wear, scoring, and potential seizure. Minimum lubrication with ISO VG 68-320 gear oil is required depending on operating speed and temperature.
What hardness difference is needed between steel worm shaft and bronze wheel?
For optimal wear pairing, the steel worm shaft should be 58-64 HRC while the phosphor bronze wheel is 80-120 HB. This large hardness differential (approximately 400-500 HV difference) ensures the softer bronze wheel wears preferentially, protecting the more expensive and harder-to-replace steel worm shaft.
Is phosphor bronze suitable for food-grade applications?
Standard phosphor bronze is not FDA-approved for direct food contact. For food processing equipment, we offer lead-free bronze alloys or food-grade engineering plastics (PEEK, POM) with FDA-compliant lubricants.
Related Resources for Phosphor Bronze
Worm Gear Hobbing
The primary manufacturing process for phosphor bronze worm wheels — efficient and cost-effective for DIN 6-8 grade production.
Learn more →DIN 3974 Standard
German tolerance grades for worm gears — reference for specifying bronze wheel precision requirements.
Learn more →Elevator Industry
Phosphor bronze worm wheels are the standard choice for elevator traction drives due to their quiet operation and long wear life.
Learn more →Material Selector Tool
Compare phosphor bronze against aluminum bronze, cast iron, and plastic for your specific application.
Learn more →