Need custom worm gears? Contact us — WhatsApp +86 138 1403 4409 · worm@wormgearmfg.com
ISO Certified
DIN 4-5 Precision Grade
Custom Manufacturing

Request a Quote

Send a drawing, or just the duty and a photo. You get a price and a lead time within 24 hours - or a short list of what is missing, which is more useful than a guess.

What happens after you send

Step 1

An engineer reads it

Not a sales inbox. The enquiry goes to the people who would have to make the part, because that is where a missing dimension gets spotted.

Step 2

Within 24 hours

A quotation against a named specification, or the specific questions that stand between your description and one.

Step 3

Drawing, then production

Production starts after the drawing is agreed, typically 7 to 15 days. The drawing is the contract; the quotation is the offer.

What to send, by part type

More enquiries fail on a missing dimension than on price. The list below is what actually decides the quotation - not a formality.

PartWhat decides the priceWhat usually gets missed
Worm gear setCentre distance, module or DP, ratio or both tooth counts, pressure angle, and the material you needA photo of the worn pair, even from a phone, resolves most of the ambiguity in a drawing-free enquiry.
Worm shaftThread form, lead, starts, journal dimensions, keyway or spline detail, and the materialThe bearing seats matter as much as the thread: state whether they can be ground undersize into a matched bearing class.
Worm wheelTooth count, module, face width, bore and keyway, and the matching worm if it is being reusedA wheel alone is only half a pair. If the worm is worn, say so - the pair is what we would quote.
NMRV gearboxSize or centre distance, ratio, mounting position, output arrangement, quantity, and whether a motor is includedCentre distance is the one dimension that cannot be substituted, so it is worth measuring twice.
Something elseWhat the part does, what it fits, and whatever dimensions you haveIf it is outside what we make, we say so rather than quoting something that will not work - see the note below on bevel gears.

Not sure how to describe it? The RFQ template lists the fields in order, and the module reference shows how to recover the tooth size from a part in your hand.

Send the enquiry

Missing numbers are fine. Saying which ones you do not have is better than guessing them.

STEP, IGES, DXF, DWG, PDF, images or a ZIP, up to 15 MB. Larger files or a folder of drawings: email worm@wormgearmfg.com.

Files go to the engineering inbox and are used to quote and manufacture. If the part is proprietary, say so - an NDA can be handled before anything is circulated.

How we quote

Terms are agreed per order, so treat the list below as the shape of a normal quotation rather than a fixed tariff. Nothing here is unusual; it is written down so the first reply does not have to be a negotiation about the basics.

ItemHow it is handled
QuantityFrom 2 pieces for standard work. Higher volumes amortise tooling, so unit price falls with quantity.
Production timeTypically 7 to 15 days after drawing approval. Not after the enquiry - the drawing has to be agreed first.
IncotermsQuoted per order, usually EXW or FOB, with CIF when a delivered figure is more useful. Which port depends on the route.
PaymentAgreed per order. New customers usually start on a deposit-and-balance arrangement; repeat orders are discussed case by case.
PackingExport packing as standard; individual labelling, desiccant or wooden cases when the destination needs them.
SamplesPossible for standard sizes and for a first article on a new drawing. Scope and cost depend on the part, so it is agreed up front.

One thing that is not negotiable: a quotation names the specification it applies to. If the size, material, accuracy class or quantity changes, the price changes with it.

What we are

A worm gear specialist working to DIN 3974, AGMA 6022, JIS B 1723 and customer drawings, with ground gearing to DIN 4–5 where the application needs it. Quality management runs under ISO 9001:2015, and inspection reports come with the order rather than on request.

What we are not: a general gear shop. If the part is outside worm gearing - bevel gears are the usual example - the enquiry gets a straight answer rather than a quotation that will not work. The about page covers the workshop and the process, and the certification page lists what is held and what is not.

Questions about the process

How fast is the reply, and what does it contain?

Within 24 hours on a working day. The reply is either a quotation - price, lead time, terms, and the drawing or specification we read it against - or a short list of what is missing before one can be issued. We do not send a price without saying what it is for.

Do I need a drawing to get a price?

No. Many enquiries arrive as a description and a photo, and that is often enough to price a standard size. For a custom part the drawing decides the price, so a missing dimension becomes a question rather than an assumption - the answer may take one more exchange.

Will you sign an NDA, and what happens to my files?

Yes, where a customer needs one. Files go to the engineering inbox and are used to quote and then to manufacture, not shared. If the part is proprietary, say so on the enquiry and the confidentiality point is handled before any drawing is circulated.

Can you make a part that is not a worm gear?

We are a worm gear specialist. Bevel gears, for example, are outside what we make - if an application genuinely needs them we say so rather than quoting. If a worm set can do the job, the enquiry is worth sending.

What if the part is worn and the markings are gone?

That is a normal enquiry. Send photographs of the wear pattern and the dimensions you can measure, and the identification route is the same one on the reference pages: module or diametral pitch from the geometry, ratio from counting turns, then the drawing confirmed before manufacture.

Is the quotation firm?

It is firm for the specification it names - size, material, accuracy class, quantity and terms. Change one of those and the price moves, which is why the quote states them rather than quoting a single figure against a vague description.